Chasing 200 MPH: Rob Dahm and Team's Thrilling Quest for High-Speed Racing Greatness
- Authors
- Published on
- Published on
- Name
- By Dushyant
- (@dishs)
In the latest adrenaline-fueled episode from Rob Dahm's YouTube channel, the team sets out on a daring quest to break the elusive 200 mph barrier in their rotary-powered car. With a current ranking of fourth in the all-wheel drive category, they are determined to push their limits and secure a higher position on the leaderboard. Armed with a top speed of 192.158 mph, they embark on a mission to fine-tune their wheel speed and boost levels, hoping to unleash the full potential of their machine.
However, their journey is not without its challenges. A glitch with the wheel speed sensors raises concerns, and upon investigation, they discover that one of the sensors has been damaged due to a faulty installation. Undeterred, the team decides to press on, making adjustments and modifications to the car in order to optimize its performance. Their efforts pay off, as they manage to achieve a top speed of 194 mph, bringing them closer to their goal of third place.
Day two arrives, and the team is more determined than ever. Armed with newfound knowledge and a laptop full of data, they set their sights on reaching the coveted 200 mph mark. However, fate has other plans. During their final run, disaster strikes as the engine suffers a catastrophic failure, potentially due to rotor and side plate contact. Despite the setback, Rob remains undeterred, viewing this as an opportunity to learn and rebuild the engine for even greater power.
In true Rob Dahm fashion, he remains optimistic and confident in the capabilities of the rotary engine. With their wealth of data and experience, the team is ready to push the boundaries even further, aiming to create a machine that not only surpasses the 200 mph mark but also outperforms other engines in terms of horsepower and endurance. It's a thrilling journey of triumphs and setbacks, showcasing the indomitable spirit of the team as they strive for greatness in the world of high-speed racing.
Image copyright Youtube
Image copyright Youtube
Image copyright Youtube
Image copyright Youtube
Watch Maxed out the BIG Turbo pushing the 4 Rotor to 2000 HP on Youtube
Viewer Reactions for Maxed out the BIG Turbo pushing the 4 Rotor to 2000 HP
Curiosity about making a 500hp single rotor engine
Excitement and anticipation for the next chapter of the 4 rotor saga
Appreciation for Rob's knowledge and educational content
Confidence and inspiration to work on rotary engines
Excitement for the new phase of the project and pushing the engine harder
Congratulatory messages for the team and the content
Interest in the details of the build and the alloys and treatments used
Suggestions for improvements and modifications
Nostalgia for previous videos and appreciation for the nerdier content
Request for a re-release of a hoodie
Related Articles
Rob Dahm's 12-Rotor Engine Triumph: Ignition Success and Celebration
Rob Dahm unveils the world's only 12-rotor engine, facing challenges but achieving a successful ignition with technical finesse and dedication. The team celebrates the milestone with a Crispy Cream Donut, showcasing the engine's power and innovation.
Building the World's Only 12 Rotor Engine: Unveiling Power and Precision
Rob Dahm showcases the world's only 12 rotor engine build by Tyson Garvin, aiming for 5-6,000 horsepower with three turbos. Detailed coil testing and injector harness assembly reveal the intricate work behind this mechanical marvel. Fuel filter placement and oil tank modification demonstrate the team's meticulous planning and ingenuity. The episode culminates in the unveiling of a Vibrant Universal catch can and the core of the 12 rotor harness, setting the stage for a dual ECU setup.
Building the World's Only 12 Rotor Engine: A Trustworthy and Innovative Project
Rob Dahm's team embarks on building the world's only 12 Rotor engine, focusing on trust and reliability in electronics. Meticulous wiring and innovative security measures with Simply Safe ensure top-notch performance and safety.
Optimizing Intake Manifold Design for Triple Turbocharging: Behind the Scenes with Rob Dahm
Rob Dahm's team tackles intake manifold design challenges, optimizing for triple turbocharging. They address welding intricacies, bolt access, and potential heat issues while showcasing Aeromotive components and testing a powerful WASP starter. Stay tuned for high-performance engineering insights!